FAS8020 stuck in loop, won't boot
Hi All,My Netapp controller doesn't boot and when I check from console i found following logs. Can you guide me how to solve it? Starting AUTOBOOT press Ctrl-C to abort...Loading...
View ArticleRe: FAS8020 stuck in loop, won't boot
I assume this system is out of support, otherwise you should contact support. From the Log "ERROR: /var filesystem device(/dev/nvrd1) failed fsck" I guess that the issues is that the boot device has...
View ArticleRe: FAS8020 stuck in loop, won't boot
Thank Chamfer for reply.Do you have any idea about following WARNING? What does it mean? Is it related with boot device fail?WARNING: save_loader_env: fflush /cfcard/env/env failed: No space left on...
View ArticleUser would like to get access at Qtree level
Hi Team,How one can provide access to user at qtree level? is it possible? if yes, How?Kindly assist.
View ArticleSecurity information not available
Hello,Hope you are doing fine.Received message "The requested security information is either unavailable or can't be displayed reason." on the properties > security Tab. Then we checked the DFS path...
View ArticleRe: Security information not available
Hi,I found below mentioned KB article for reference....
View ArticleRe: User would like to get access at Qtree level
can you clarify your question? Do you mean how to create a qtree and share it out? Here's a good starting point - https://docs.netapp.com/us-en/ontap/volumes/commands-manage-qtrees-reference.html
View ArticleRe: User would like to get access at Qtree level
Hi @SpindleNinja ,We received error message "The requested security information is either unavailable or can't be displayed reason." on the properties > security Tab. Then we checked the DFS path...
View ArticleS3-Bucket Key Authentication
Hello everyone, I would like to know if I can use a FAS 2720 and ONTAP 9.12 to share S3 buckets with public and private key authentication? The idea is that the client has the private key on his...
View ArticleRe: S3-Bucket Key Authentication
S3 uses its own key pairs and there's no way to "map" them to some other keys stored on ONTAP. If you want to build some client-side stuff that prompts the user to enter a password (for Active...
View ArticleHow to disable flow load sharing in two lif?
I create a CIFS SVM in c250,and create two lif for svm,When I use the windows client mount one of a lif's ip address be a network drive,and use tool to test the read and write,something is very...
View ArticleRe: S3-Bucket Key Authentication
Thank you elementx for your reply. Your answer and the documentation provided in your reply will help me in my study. Best wishes for 2024. Philippe (Paris France)
View ArticleRe: FAS8020 stuck in loop, won't boot
@thuralwin if the boot device has failed then a process performing writes would assume there is no space left on the device as the boot device is not able to confirm writes.
View ArticleCisco port-channel group 1 interface up, 2nd interface shows suspended No...
I did an upgrade on our AFF-C250 from 9.12.p8 to 9.12.p10 and received a bunch of error messages along the lines of "Your LIFs are non-redundant". When I checked on the switch, I found that the...
View ArticleRe: FAS8020 stuck in loop, won't boot
Is this a production unit? If not, you could break the boot sequence and reset to factory defaults. This will delete all data, so don't do this if this is production. After the disks have been...
View ArticleRe: Cisco port-channel group 1 interface up, 2nd interface shows suspended No...
NetApp Support does not have any concrete ideas yet. Looking at the Cisco, in one port-channel we have two interfaces; one is up and passing traffic and the other is down/suspended. On the NetApp e0a...
View ArticleRe: Cisco port-channel group 1 interface up, 2nd interface shows suspended No...
Also opened a case with Cisco, but they don't see anything wrong with the switch or the configs. They were also unaware of any bugs that might be causing this behavior.
View ArticleRe: Cisco port-channel group 1 interface up, 2nd interface shows suspended No...
It appears as though this has been resolved by a reboot of each node. NetApp support informed that some network cards get locked after a reboot and the solution is to reboot the nodes again. There is...
View ArticleClik here to view.
NVMe Host QoS
Starting ONTAP 9.14.1 Release, ONTAP Supports NVMe Host QoS. Host QoS is part of an end-to-end QoS solution that allows setting up the QoS at the NVMe Subsystem Level. There are 2 types of QoS that can...
View ArticleRe: SMB file audit delete events
I also have been doing some research on why that was happening and I found this question without answer. If it had an answer I may have solved this sooner so let me contribute to the outcome I got with...
View Article