Re: cifs cannot be set in ontap 9.9.1
Hi,hmoubaraThanks for your advice.The cifs server has been created without any problems. After creatingIn the "Access Protocol" of the SVM setting screen, on the screen where CIFS is selected, there is...
View ArticleRe: cifs cannot be set in ontap 9.9.1
solved.CIFS could not be set in the GUI, but could be set with a command. Thanks
View ArticleAbout Cifs access
HiI don't know how to access Cifs from a Windows client without entering an ID and password.Please let me know. Thanks
View ArticleRe: About Cifs access
Can you clarify? Do you have AD enabled and it's constantly prompting? Or you want to be able to share out a volume without any auth?
View ArticleRe: About Cifs access
I don't use ad.I want to be able to share from any user without authentication.
View ArticleRe: About Cifs access
How to enable CIFS share access with no credentials login or from untrusted domains
View ArticleWhy doesn't SVM only communicate with DNS via port 636 ?
Hello community, we have a problem that we are noticing now for the first time. We are currently using ONTAP 9.8P11 on FAS2750.Our network administrators would like to use port 636 for communication...
View ArticleRe: Why doesn't SVM only communicate with DNS via port 636 ?
Hi Michael, Also 636 is only for ONTAP to AD-LDAP connections and for DNS it will always connect to port 53( UDP and if needed TCP). When CIFS server is created on the SVM . Domain Controller Discovery...
View ArticleRe: Why doesn't SVM only communicate with DNS via port 636 ?
Hello Vijay, thank you very much for your answer. I have now understood the periodic access every 4 hours. What irritates me is your question with which LIF the connection is established ("the same SVM...
View ArticleRe: Why doesn't SVM only communicate with DNS via port 636 ?
Hi Michael, Sorry for making the query complex. Let me reframe the question Since you have enabled "use-ldaps-for-ad-ldap" it is expected that for this SVM the AD-LDAP connection would happen via port...
View ArticleHow to get BMC network neighbors on A800?
Hi,On the A800 there are one network port for e0M and a second for the BMC.With network device-discovery show I see the network neighbors for all ports except for BMC.Is there any possibility to get...
View ArticleRe: How to get BMC network neighbors on A800?
network device-discovery show will work on the network ports.Regarding BMC port, you can try to use the mac address of the port.system service-processor network show
View ArticleInconsistent LACP system ID
PROBLEMI am configuring (4) NICs on a two-node AF200 9.9.1P6 cluster with LACP, to attach to a pair of Cisco switches (configured with vPC) The (2) Cisco switches are emitting identical LACP System...
View ArticleRe: Inconsistent LACP system ID
This is expected behaviour. It is necessary to create a channel group to each controller, and then ONTAP will take care of moving IPs between nodes during failover or in case both links to a controller...
View ArticleMigrate Microsoft File Server CIFS Environment to CVOT
Hi, we have a requirement to migrate all CIFS shares currently hosted on a Windows 2012 R2 server to an Azure CVOT cluster. Probably around 10TB of data. I haven't been able to find much via...
View ArticleRe: Inconsistent LACP system ID
It seems to me though that I have done precisely that: I have a created an LACP channel (a0b) and then assigned (4) links to it (two from each controller). I want to present to the switches a single...
View ArticleRe: Inconsistent LACP system ID
No, your first setup was correct for the NetApp controller side. From the cisco side, you need to create two channel groups, one per NetApp controller, each with two ports - one port from each of the...
View ArticleRe: Inconsistent LACP system ID
I see ... I had been looking at this sideways ... thank you! Works now --sk
View ArticleRe: How to get BMC network neighbors on A800?
Thanks for your reply.I have to search the switches for BMC MAC to get the port. I was hoping that this would also work from the filer.
View ArticleRe: Migrate Microsoft File Server CIFS Environment to CVOT
Hi I am sure some of our other team members can give you a bit more direction here, but in the meantime, have you reviewed our NetApp Cloud Sync service as that may help you with your data migration...
View Article