Re: non domain computer cant access cifs share
Yes. Usually, SMB version "negotiation" depends on the highest version supported by both the clients and the servers. So, depending upon the 'client', you could disable SMB3 on the Ontap and try...
View ArticleRe: non domain computer cant access cifs share
thanks, I'll try with that, and also read through the KBs.
View ArticleRe: snapmirror / minimalize downtime
Thank you for the response. We don't want to add the new nodes to the existing cluster for warranty reasons. We still plan to keep the old cluster cluster around til the warranty expires in a...
View ArticleRe: snapmirror / minimalize downtime
Snapmirror is ever reliable and provides data-consistent migration. In this situation, I think there will be some downtime during final cut-off (snapmirror-breaking-making dest vol read/write etc)....
View ArticleRe: non domain computer cant access cifs share
I've now disabled SMB3 and SMB3.1, but to no avail. 😞current cifs server options are:Vserver: napV2Client Session Timeout: 900Copy Offload Enabled: falseDefault Unix Group: -Default Unix User:...
View ArticleRe: NDMP NetApp Recommendations vs Commvault
This is what I was looking for and solved my doubts: https://kb.netapp.com/Advice_and_Troubleshooting/Data_Protection_and_Security/NDMP/What_is_the_LIF_Choice_order_for_Cluster_Aware_backups_in_NDMP%3F
View ArticleESXi iSCSI port not connecting to ONTAP Select ifgrp port but does connect...
Good day, My setup:- ONTAP Select 9.11.1RC1 VM running on standalone ESXi server- vCenter 6.5 with 2 ESXi node cluster- all systems on the same subnet in VMWare workstation- no simulated switches or...
View ArticleRe: ESXi iSCSI port not connecting to ONTAP Select ifgrp port but does...
Interface groups (IFGRPs) are not supported n ONTAP Select. ONTAP features not supported in ONTAP...
View ArticleRe: ESXi iSCSI port not connecting to ONTAP Select ifgrp port but does...
Thank you! Much appreciated
View ArticleIPsec client configuration
Hi,We have to setup IPsec ( for NFS and Cifs Client) between NetApp and some OS. We succeed to do it for Linux, but not for IBM Aix OS. Has anyone ever configured IPSec between ONTAP and Aix? if yes,...
View ArticleRe: IPsec client configuration
I don't know the answer. But, out of curiosity I started to look up for Ipsec and it looks like it only uses following traffic selectors such as...
View ArticleRe: IPsec client configuration
I think each OS has its own way of implementing IPSEC. for example, for Linux I use Liberswan, for Windows we use natif IPsec.
View ArticleSidhistory issue with 7 mode system
Hi All,We have used ADMT to miragate sidhistory between domains and we have windows file servers that are succesfully using sid history to give user access to fileshares, however we cannot get 2 netapp...
View ArticleClik here to view.
How does NVMe/FC namespace support two different OS platform to perform...
Here is one issue from my customer who using the NVMe/ FC withLANfree backup requirement: Environment info:Storage system : NetApp A250ONTAP version: 9.10.1Storage Protocol： NVMe over FCFive VMware...
View ArticleRe: How does NVMe/FC namespace support two different OS platform to perform...
I found the following text in this article: "It should be mentioned that the current NVMe specification does not specify namespace share across NVM subsystem, which is settled down in NVMe 1.4 draft...
View ArticleCannot ping IP after changing IP address of two interfaces in netapp 7 mode...
Hello everyone, I had an issue with an MTU discrepancy where ports e0a and e0b were 9000 and 1500 respectively. So instead of reconfiguring the MTU in e0a to 1500, the IPs were removed and migrated to...
View ArticleRe: Cannot ping IP after changing IP address of two interfaces in netapp 7...
Is this the kb you followed? How to change the IP address of an interface in 7 mode...
View ArticleRe: Cannot ping IP after changing IP address of two interfaces in netapp 7...
Yes. Exactly. I followed through w/ the steps from that article but still could not ping the IP after making the change.
View ArticleRe: Cannot ping IP after changing IP address of two interfaces in netapp 7...
Ok. Have you checked if there is proper route to the changed IPs? Could you share screenshot or output of the ifconfig -a, and route -s, also rdfile /et/rc & hosts ?
View Article