Hello,
VLAN tag are not supported or best practice, the better wat is to set your switch port as untaged or with a untaged by befault if is trunked
see this article : https://kb.netapp.com/on-prem/ontap/da/NAS/NAS-KBs/e0M_Service_Processor_or_BMC_unreachable_on_network_due_to_VLAN_tagging_on_switch_port
- As VLAN tagging can not be applied to the e0M/SP/BMC interfaces, a change should be made on the switch port the e0M/SP/BMC is connected to
- On the affected switch port, add the correct VLAN as the native VLAN if using a trunk port, or the default VLAN if utilizing an access port
- Please refer to your switch vendor's documentation to make the necessary change
- As the e0M/SP/BMC can only support a single untagged VLAN, making the affected switch port an access port is recommended, however not required